The URL can be used to link to this page

Home My WebLink AboutJOC TO 03 - Ped Light Submittal ELECTRICAL SUBMITTAL October 15th, 2019 Light Poles & Fixtures Conductors & Fuseholders Grounding Submittal No. 01 ELECTRICAL SUBCONTRACTOR: Electricraft, Inc. 200 Suburban Road, Suite A San Luis Obispo, CA 93401 (805) 544-8224 FAX (805) 544-0208 jhaley@electricraftinc.com Project Manager: Jack Haley Job No. 19-267 PROJECT: City of San Luis Obispo Broad Street Pedestrian Lighting PREPARED FOR GENERAL CONTRACTOR: D-Kal Engineering PO Box 1919 San Luis Obispo, CA 93406 TEL: (805) 543-7759 FAX: (805) 543-7759 garret@dkaleng.com Project Manager: Garrett Loughran City of San Luis Obispo Broad Street Pedestrian Lighting ELECTRICAL MATERIAL AND EQUIPMENT LIST FOR APPROVAL Submittal No. 01 October 15th, 2019 ITEM MANUFACTURER SPEC SECTION Globe Fixture Lumec N/A Light Pole Lumec N/A Conductors Southwire N/A Sealpack 3M N/A Super 33+ Vinyl Electrical Tape 3M N/A Fuseholders Cooper N/A Fuses Cooper N/A Ground Rod Dottie N/A Ground Rod Clamp Dottie N/A San Luis Obispo City of (36835) CITY OF SAN LUIS OBISPO DECORATIVE LUMEC SPEC20190503_153207_36835_335 5-2019 05-22-2019 Page 1 / 5 Qty 1 Luminaire [L50-003]-40W42LED4K-G2-PC-CGB-RLE3-UNIV-SF3-FN1-[PH7-001]- SCZT311G105TX Description of Components: Finial: Decorative cast 356 aluminum, mechanically assembled. Cupola: Decorative spun aluminum 1100-0, mechanically mounted on hood. Hood: Spun aluminum 1100-0 dome, permanently assembled to the globe. Access-Mechanism: Rotomatic, die-cast A360 aluminum quarter-turn mechanism with constant-pressure spring-loaded points. The mechanism shall offer tool-free access to the inside of the luminaire. An embedded memory-retentive gasket shall ensure weatherproofing. A red key on the unit shall indicate point of engagement. Light Engine: EcoSwap Rotomatic tool-free system composed of 4 main components: Heat Sink / LED Module / Optical System / Driver Electrical components are RoHS compliant. Heat Sink: Made of extruded aluminum optimising the LEDs efficiency and life. Product does not use any cooling device with moving parts (only passive cooling device) Globe: (PC-CGB) Made of one-piece roto molded clear finish with internal glass bead blast giving a soft diffusing lighting effect. polycarbonate. The globe is mechanically assembled on the access mechanism. LED Module: Composed of 42 high-performance white LEDs. Color temperature as per ANSI/NEMA bin Neutral White, 4000 Kelvin nominal (3985K +/- 275K or 3710K to 4260K), CRI 70 Min. 75 Typical. Optical System: (RLE3), IES type III (asymmetrical). Composed of high-performance acrylic refractor lenses to achieve EPA: 1.86 sq ft / weight: 31 lb (14.1 kg) San Luis Obispo City of (36835) CITY OF SAN LUIS OBISPO DECORATIVE LUMEC SPEC20190503_153207_36835_335 5-2019 05-22-2019 Page 2 / 5 optimized distribution and get maximum spacing. target lumens will create a perfect lighting uniformity. Performance shall be tested per LM-63, LM-79 and TM-15 (IESNA) certifying its photometric performance. Painted color grey. Driver: High power factor of 90%. Electronic driver, operating range 50/60 Hz. Auto-adjusting to a voltage between 120 and 277 volt AC rated for both application line to line or line to neutral, Class 2, THD of 20% max. Maximum ambient operating temperature from -40F(-40C) to 130F(55C) degrees. Assembled on a unitized removable tray with Tyco quick disconnect plug resisting to 221F(105C) degrees. The current supplying the LEDs will be reduced by the driver if the internal driver temperature exceeds 185F(85C), as a protection to the LEDs and the electrical components. Output is protected from short circuits, voltage overload and current overload. Automatic recovery after correction. Surge Protector: Surge protector tested in accordance with ANSI/IEEE C62.45 per ANSI/IEEE C62.41.2 Scenario I Category C High Exposure 10kV/10kA waveforms for Line-Ground, Line-Neutral and Neutral-Ground, and in accordance with U.S. DOE (Department of Energy) MSSLC (Municipal Solid-State Street Lighting Consortium) model specification for LED roadway luminaires electrical immunity requirements for High Test Level 10kV / 10kA. Fitter: (SF3), Cast 356 aluminum c/w 4 set screws 3/8-16 UNC. Slip-fits on a 4"(102mm) outside diameter x 4" (102mm) long tenon. Luminaire Options: (PH7-001), Universal Photoelectric Cell, Button Type, 120V-277V. San Luis Obispo City of (36835) CITY OF SAN LUIS OBISPO DECORATIVE LUMEC SPEC20190503_153207_36835_335 5-2019 05-22-2019 Page 3 / 5 Description of Components: Pole Shaft: Shall be made from a mandrel-formed aluminum tapered shaft, 12 fluted round, having a 0.125" (3.2mm) wall thickness, welded to both the bottom and top of the anchor plate Base Cover: Two piece round base cover made from cast 356 aluminum, mechanically fastened with stainless steel screws. Note: A tenon will be provided when the luminaire or bracket does not fit directly on pole shaft. Tenon not shown on the drawing. IMPORTANT: Lumec strongly recommends the installation of the complete lighting assembly with all of its accessories upon the anchoring of the pole. This will ensure that the structural integrity of the product is maintained throughout its lifetime. Pole Weight: 28 lbs (12.7 kg) Qty 1 Pole RTA500F-12-SCZT311G105TX Comes with 4 steel anchor bolts, 1" X 33" + 3" J Type Bolts, Fully Galvanized, 8 nuts and 8 washers. Important: Do not obstruct space between anchor plate and concrete - Bolt Circle: 9 1/2" (241mm) - Material: Cast Aluminum - NOTE: Bolt Circle Allowed: 9" to 10" 229mm to 254mm Base & Bolts Information Anchor Plate Free opening San Luis Obispo City of (36835) CITY OF SAN LUIS OBISPO DECORATIVE LUMEC SPEC20190503_153207_36835_335 5-2019 05-22-2019 Page 4 / 5 Description of Components: Wiring: Gauge (#14) TEW/AWM 1015 or 1230 wires, 6" (152mm) minimum exceeding from luminaire. Hardware: All exposed screws shall be com plete with Ceramic primer-seal basecoat to reduce seizing of the parts and offers a high resistance to corrosion. All seals and sealing devices are made and/or lined with EPDM and/or silicone and/or rubber. Anchor Bolts: Anchor bolts made of ASTM F1554 grade 55 steel having a minimum yield strength of 55000 psi. Nuts made of ASTM A563 grade A steel or better. The thread fit is ANSI class 2B regardless of bolt diameter. Washers are made of ASTM grade F-844 or better steel. All galvanized parts are hot dip galvanized per ACNOR G-164 minimum. Finish: (SCZT311G105TX) Special Color ZT311G105, textured Protech Z Series Textured Color SLO Green. In accordance with the AAMA 2603 standard. Application of polyester powder coat paint (4 mils/100 microns) with ± 1 m ils/24 microns of tolerance. The Thermosetting resins provides a discoloration resistant finish in accordance with the ASTM D2244 standard, as well as luster retention in keeping with the ASTM D523 standard and humidity proof in accordance with the ASTM D2247 standard. The surface treatment achieves a minimum of 2000 hours for salt spray resistant finish in accordance with testing performed and per ASTM B117 standard. LED products manufacturing standard: The electronic components sensitive to electrostatic discharge (ESD) such as light emitting diodes (LEDs) are assembled in compliance with IEC61340-5-1 and ANSI/ESD S20.20 standards so as to eliminate ESD events that could decrease the useful life of the product. Quality Control: The manufacturer must provide a written confirmation of its ISO 9001-2008 and ISO 14001-2004 International Quality Standards Certification. Vibration Resistance: Aluminum poles are not recommended in high vibration environments such as bridge, overpass, top of building, airport, train station, etc. Mechanical resistance: This design information is intended as a general guideline only. The customer is solely responsible for proper selection of pole, luminaire, accessories and foundation under the given site conditions and intended usage. The addition of any other item to the pole may dramatically impact the wind load on that pole. It is strongly recommended that a qualified professional be consulted to analyze the loads given the user’s specific needs to ensure proper selection of the pole, luminaire, accessories, and foundation. Lumec assumes no responsibility for such complete analysis or product selection. Failure to insure proper site analysis, pole selection, loads and installation can result in pole failure, leading to serious injury or property damage. Web site information details: / cULus Certification / CSA Pole Certification Miscellaneous San Luis Obispo City of (36835) CITY OF SAN LUIS OBISPO DECORATIVE LUMEC SPEC20190503_153207_36835_335 5-2019 05-22-2019 Page 5 / 5