Loading...
The URL can be used to link to this page
Your browser does not support the video tag.
Home
My WebLink
About
842 Palm St. Garage - City of San Luis Obispo Submittal Packet
FlashSubmi alPacket ProjectName: 842 Palm St. Garage - City of San Luis Obispo ProjectNumber:006Pg00000Enk1dIAB Date: 12/12/2024 Created By: Rickey Sanchez General Manager rickey.sanchez@flashparking.com Mobile | 916-335-8306 EXHIBIT E Project Name: 842 Palm St. Garage - City of San Luis Obispo Project Number: 006Pg00000Enk1dIAB Quote Number: 81599 Date: 12/12/2024 Scope of work: Furnish and install the following: ●Entry Kiosk (2) ●Exit Kiosk (2) ●Pay on Foot Kiosk *Credit Card w/ cash (2) ●Pedestrian Warning Signs (2) ●AVI Readers (4) ●License Plate Recognition Cameras (Vision) (4) SiteRequirements: Each lane of parking equipment consisting of a typical kiosk and barrier gate will need 120 Volt, 20 Amp power circuit to power that lane. Conduits, wiring and power termination by others. Please refer to site specific plans for exact conduit stub locations. Each kiosk requires 1 CAT6 home run data cables by others. Each gate column requires a power conduit and a data conduit to the kiosk. Data cable terminations at the Flash equipment will be performed by Flash. Fiber terminations and media converters by others. ●A minimum internet speed of 10 MBPS (upload/download) is required. If there are more than 10 kiosks, an additional 1 MBPS per kiosk is required at minimum. If Vision is being used, an additional 4 MBPS per controller is required at a minimum. ●Typical island drawings are for informational purposes only and not intended for construction or permi ing purposes. Site specific coordination plans available upon request. InstallationDisclosure - Upon agreed project scheduling between both parties (Flash & Client); any site delays preventing both the Flash provided installer/site commissioner completing any designated work will lead to a $1,250.00 change order cost per day. These additional costs will also be reflected by any return trips or re-mobilization mid-install as well. The site readiness form in this submi al packet will need to be completed prior to on site presence from Flash SoftwareDisclaimer - The Flash PARCS equipment operates through a cloud based system. The equipment requires the Flash OS and additional software modules to function. The OS and any additional software modules require a monthly recurring subscription cost. Without the software activated, the equipment will not function and testing cannot be completed. If the software is not activated or completed at the time of installation it will result in a return visit with associated travel costs. EXHIBIT E ProductDocumentation PayOnFootStations(FreeStanding) ●The back side of the standard kiosks has a service door that will need to swing open. The front of the kiosk should be mounted 24" from the wall. Note: Flash kiosks are the same dimensions regardless of whether they are being used as an Entry, Exit, or Pay on Foot (POF) station. AVIReader ●A single conduit pathway is needed from AVI reader mounting location back to the Flash controller for that particular lane. The conduit pathway will need to be sized for a single CAT6 and 18/10 shielded wires. ●The AVI reader will be mounted 6” above posted clearance height, directly center of the lane. If ceiling mounted, aim for the center line of each applicable lane. ●Drop down poles can be added for an additional cost. LicensePlateRecognition–Vision ●Each Vision Camera requires a homerun data line back to Flash’s network switch. ●Deviating from recommended distance and height requirements shown in our lane typicals may result in lower read rates. If distance to lane and height of camera must be changed, please consult with Flash on where to install cameras for optimal read rates. ●License plate data will not be stored on Flash’s cloud system and is the responsibility of the garage owner or operator to store and manage. VinylKioskWraps ●Flash can vinyl wrap the kiosks with 3M 8518 overlaminate wraps for an additional cost. All custom vinyl wrap designs must be approved by the client prior to printing and production. FlashPARCSinstallationsincludethefollowingheadendequipmenttobehousedintheIDFroomnearestthelane equipment: ●Merchant Gateway - Gateway communication from the equipment to the internet. This unit is included in the base bid as part of the “Network Kit”. ●4G LTE Modem – Provides temporary back up to the cloud if location loses primary internet. This unit is included in base bid as part of the “Network Kit”. ●ProSAFE® 8-port Gigabit Smart Managed Switch - Router for parking equipment. This unit is included in base bid as part of the “Network Kit”. The network kit can be wall mounted (See reference diagram for power and data requirements). Can also be mounted in a server rack if provided by others. Server racks can be provided by Flash at an additional cost. CommunicationRequirements The maximum homerun length between the parking equipment and the network switch for the cat6 ethernet cable is 328 feet. Distances greater than 328’ will see degradation of data quality. If the distance to any of the equipment exceeds 328’ then we will need to follow one of three options: Option1 – Network extender can be provided by Flash for an additional cost. These extenders will require an additional power outlet in the IDF room, and will extend the usable range of Cat6 cabling to 5,280 feet. EXHIBIT E Option2 – Create a pathway from the parking equipment to the switch to extend the data connection. The switch can be mounted on the ceiling or hidden in an electrical room. The 328’ length restarts at each switch. Option3 – Fiber network to be specified and provided by others. SFP cards, media converters, Gbic converters and terminations by others. EXHIBIT E Network Information EXHIBIT E ACUMERA MG FIREWALL NETGEAR 8 PORT NETWORK SWITCH CUSTOMER SUPPLIED INTERNET ACCESS FLASH EQUIPMENT WAN AUXLANLAN 2'-6" 2'-6" 3" 3" 8" 6" 6" 4" FLASH CLOUD TELTONIKARUT240SCALE: 1" = 5"FLASH NETWORK KIT1 3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:8/30/23DESIGNED BYBSG----- ----- VENDOR SHOP DRAWINGS FLASH TYPICAL(FOR INFORMATIONAL PURPOSES ONLY)-----------------------------------------------------------------PROJECT NUMBER: N/AWALL MOUNT ON PLYWOOD CONFIGURATION NOTES: 1. REQUIRES 120V 20A CIRCUIT IN ONE OF THE FOLLOWING OPTIONS AS EACH DEVICE HAS ITS OWN POWER CABLE WITH AN INTERNAL TRANSFORMER. 1.1. OPTION 1: CLIENT TO PROVIDE POWER OUTLET. FLASH WILL SUPPLY A POWER STRIP WHERE ALLOWED BY FIRE MARSHALL. WRITTEN PERMISSION MUST BE SUBMITTED TO FLASH FOR THIS OPTION. 1.2. OPTION 2: CLIENT TO PROVIDE TWO SINGLE GANG DOUBLE DUPLEX POWER OUTLETS. DUE TO THE TRANSFORMERS ON THE POWER CABLES, A 2-GANG DOUBLE DUPLEX WILL NOT SUFFICE. 2. REQUIRES OPEN INTERNET CONNECTION. IP WHITELIST CAN BE PROVIDED UPON REQUEST. VLAN PROVIDED BY OTHERS IF NETWORK TOPOLOGY REQUIRES. EXHIBIT E © Copyright 2022 Acumera MGEDG_SPEC_DIR_06202022 acumera.com/MGdevice | sales@acumera.com | 512.687.7410 Acumera MG™ Edge Security Device Specifications Characteristic Description Advanced Firewall Stateful firewall and traffic inspection that complies with PCI DSS and other compliance frameworks Application Platform Platform that supports secure, compliant deployment of internal, network-attached devices, temperature and door monitoring, and external services like payment processing, fuel supply chain management, EPA and FDA compliance management and retail analytics Cloud Managed Cloud-based dashboard with role-based access control to manage network segmentation, problem tracking, vendor integrations and geographic dispatch support Ruggedized for Retail Wall, rack, DIN rail or shelf-mounted appliance that is rated at IP53 and 32°F to 140°F non-condensing (higher temperature rating available) Indicators 8 LED indicators to provide at-a-glance insight into device status CPU ARM Cortex-A7, 2 cores, 1.0 GHz Memory 2GB RAM Connectivity 3x 10/100/1000, Auto MDI-X Ethernet 2x high-speed RS-232 isolated to 5000 volts 1x USB 3.0 1-wire IoT sensor bus 3x contact closure sensors M.2 SATA (up to 1TB SSD available at time of purchase) WAN failover with automated failover connection testing Capacity Deployments ranging from a single kiosk application all the way up to big-box retail applications with thousands of endpoint devices Security and Security Attestations Services provided by Acumera, a PCI DSS Level 1 service provider that is listed on the Visa and Mastercard global registries of PCI DSS compliant service providers Acumera managed technology, people and process to comply with the NIST Cybersecurity Framework and the recommendations of NIST Special Publications 800- 52, 800-53 and 800-77 and other relevant standards Enhanced Security Services Enhanced security services that include intrusion detection, deep packet inspection, analysis and retention, and customizable managed detection and response Ephemeral Connectivity for Third Parties Award-winning technology that keeps vendors from maintaining persistent connections to the network while providing secure data access in compliance with PCI DSS and other compliance frameworks Power Requirements 12VDC, maximum of 16 watts (55 BTU/hr) depending on attached devices Physical Appliance: 15cm (6”) x 20cm (8”) x 4cm (1.5”) 600g (1.2 lbs) Package: 18cm (7”) x 30cm (12”) x 7.5cm (3”) 850g (1.9 lbs) Acumera MG™ Edge Security Device0041AC006000 Acumera, Inc.3307 Northland Dr, Ste 170Austin, TX 78731 USA May Be Hot EXHIBIT E RUT240 INDUSTRIAL CELLULAR ROUTER FLYER // RUT240 // RUT240 is an all-time bestseller industrial 4G LTE Wi-Fi router for professional M2M & IoT applications. // It delivers high performance for mission-critical cellular commu- nication in rigorous environments. // RUT240 is widely used for 4G backup, Remote Connection, Advanced VPN, and tunneling services in IoT networking solutions. // WAN failover ensures automatic switch to alternative backup connection in case of any connectivity issues. // The Wi-Fi is functional in both: Access point and Station mode at the same time. RUT240 360 VIEW For remote management, access & VPN services Wireless Access Point with Hotspot functionality 4G LTE (Cat 4), 3G, 2G Automatic switching to available Backup connection RMSWI-FICONNECTIVITY WAN FAILOVER COMPATIBLE WITH RUT240 Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. RMS MANAGEMENT ALERTS CONFIGURATION ACCESS FOTA REMOTEMANAGEMENTSYSTEM EXHIBIT E Copyright © 2023, TELTONIKA NETWORKS. Specifications and information given in this document are subject to change by TELTONIKA NETWORKS without prior notice. FLYER // RUT240 KEY FEATURES HARDWARE SOFTWARE Mobile 4G/LTE (Cat 4), 3G, 2G CPU Atheros, MIPS 24Kc, 400 MHz Storage 16 MB Flash Memory 64 MB RAM Powering option 4pin power socket, 9-30 VDC SIM 1 x External SIM holder (2FF) 2 x SMA for mobile, 1 x RP-SMA for WiFiAntenna connectors Ethernet 2 x 10/100 Ethernet ports: 1 x WAN (configurable as LAN), 1 x LAN WiFi IEEE 802.11b/g/n, Access point (AP), Station (STA) Inputs/Outputs On 4pin socket: 1 x Digital input, 1 x Digital open collector output Status LEDs 3 x Connection type, 5 x Signal strength, 2 x Ethernet, 1 x Power Operating temperature -40 °C to 75 °C Housing Aluminium housing with DIN rail mounting option, plastic panels Dimensions (W x H x D) Weight 83 x 25 x 74 mm 125 g Operating system RutOS (OpenWrt based Linux OS) Mobile features Network protocols Network Failover (Network backup), VLAN, QoS, Load Balancing Security VPN and tunneling OpenVPN, IPsec, GRE, PPTP, L2TP, Stunnel, DMVPN, SSTP, ZeroTier, WireGuard Monitoring and Management WEB UI, CLI, SSH, CALL, SMS, TR-069, SNMP, JSON-RPC, MQTT, MODBUS, RMS Connection monitoring Ping Reboot, Wget reboot, Periodic Reboot, LCP and ICMP for link inspection Cloud solutions RMS, FOTA, Azure IoT Hub, Cloud of Things, Cumulocity, ThingWorx SMS features Services DDNS, VRRP, Wake On Lan (WOL), WEB filter, UPNP, Traffic Logging Auto APN, Band lock FRONT VIEW BACK VIEW SMS status, SMS configuration, Send/Read SMS via HTTP POST/GET, EMAIL to SMS, SMS to Email, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, SMPP DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), Port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSLv3, TLS 1.3, ARP, PPP, PPPoE, DHCP, Telnet SIM card slots LAN Ethernet port WAN Ethernet portPower socket LTE antennaconnectorReset button WiFi antennaconnector LTE antennaconnector EXHIBIT E PAGE 1 of 5 8-port Gigabit Smart Switch Data Sheet | GS108Tv2 Power up Your Small Network with Gigabit Speeds The NETGEAR® family of Gigabit Smart Switches is purposely designed for SMB customers with high performance, SMB- oriented features and easy management. With 8 10/100/1000 Mbps ports, each capable of powering 2000 Mbps of data throughput in full-duplex mode per port, the GS108T is an ideal solution for extending network connections into conference room, labs, lobbies and department workgroups. It enables SMB networks to support Voice over IP (VoIP), streaming media, multicasting, security, and many other bandwidth-intensive applications like ERP and large file transfers. The GS108T comes with a comprehensive set of L2 features, such as access control lists (ACL), 802.1x port authentication (MD5), enhanced QoS, rate limiting and IGMP snooping among others to provide a small or medium-sized business with a network that is geared for growth while ensuring performance and reliability. In addition, the Port 1 of GS108T is a PD port. It can not only obtain its power from an external AC power adapter as any other switch does, but also from a PoE source to pass the power through. This gives an SMB flexibility when installing the switch in places where a power outlet is not present. The GS108T comes with both an intuitive Web-browser GUI interface and Smart Control Center (Windows PC required), which offer simple Smart Switch management, making it a snap to monitor switch performance, configure ports, even set up port trunks, VLANs, and traffic prioritization. Alternatively, you can use SNMP-based software to manage your Smart Switch. NETGEAR Smart Switches are ideal for adding basic management to your unmanaged networks or extending your managed networks. Highlights Intelligent • The GS108T provides cost-efficient solutions that enable SMB customers to better manage their network. Included are performance monitoring, port configuration, VLAN for traffic control, link aggregation for increased bandwidth, IGMP snooping for facilitating multicast applications, and Class of Service (CoS) for traffic prioritization. Ideal Advanced Security • These Gigabit Smart Switches have advanced features that provide more robust security to SMBs. These include: 802.1x for authentication (MD5), ACL filtering to permit or deny traffic based on MAC or IP addresses single pane-of- glass view Advanced Quality of Service • Priority queuing ensures that high- priority traffic gets delivered efficiently, even during congestion from high-traffic bursts. Companies implementing network telephony or video conferencing, for example, need to be able to prioritize such voice and video traffic and other real-time applications over less latency-sensitive traffic to ensure reliability and quality. The ability to prioritize traffic ensures quality of latency-sensitive services and applications despite increasing traffic loads. The Gigabit Smart Switch provides an extensive set of QoS features: 802.1p-based prioritization, Layer 3-based prioritization, Rate limiting EXHIBIT E Connects to optional power adapter (located on back) Connects to printersConnects to Desktop PCs Dual Band Wireless-N Access Point Connects to server VPN Firewall Connects to server Cable/DSL modem Connects to 24-port 10/100/1000 Smart PoE Switch which provides power to the PSE switch PAGE 2 of 5 8-port Gigabit Smart Switch Data Sheet | GS108Tv2 Example Application EXHIBIT E PAGE 3 of 5 8-port Gigabit Smart Switch Data Sheet | GS108Tv2 Network Protocol and Standards Compatibility GS108Tv2 IEEE 802.3i 10BASE-T Yes IEEE 802.3u 100BASE-TX Yes IEEE 802.3ab 1000BASE-T Yes IEEE 802.3x full-duplex flow control Yes Power Supply Power consumption: 6W maximum Yes Network Ports 8 10/100/1000Mbps auto sensing Gigabit Ethernet Yes Physical Specifications Dimensions (W x D x H)158 x 105 x 27mm (6.2 x 4.1 x 1.1in) Weight 0.56kg (1.23 lb) Performance Specifications Forwarding modes Store-and-forward Bandwidth 16Gbps full duplex Network latency Less than 15μs for 64-byte frames in store-and-forward mode for 1000 Mbps to 1000 Mbps transmission Buffer memory 512KB embedded memory per unit Address database size 4k media access control (MAC) addresses per system Mean time between failures (MTBF)275,533 hours (~32 years) Acoustic noise 0dB Electromagnetic Emissions CE mark, commercial FCC Part 15 Class B VCCI Class B C-Tick Environmental Specifications Operating Temperature Switch: 32° to 122°F (0° to 50°C) Adapter: 32° to 104°F (0° to 40°C) Storage Temperature -4° to 158°F (-20° to 70°C) Operating Humidity 90% maximum relative humidity, non-condensing Storage humidity 95% maximum relative humidity, non-condensing Operating altitude 10,000ft (3,000m) maximum Storage altitude 10,000ft (3,000m) maximum Status LEDs Per port Link/activity, speed Per device Power Power Adapter 12V, 1.0A power adapter, localized to country of sale Alternatively, unit can be powered by IEEE 802.3af PSE via Ethernet port1 EXHIBIT E PAGE 4 of 5 8-port Gigabit Smart Switch Data Sheet | GS108Tv2 Electromagnetic Immunity GS108Tv2 EN 55024 Safety CE mark, commercial cUL IEC 950/EN 60950 CB Administrative Switch Management IEEE 802.1Q Static VLAN (64 groups, Static)Yes Protected ports Yes IEEE 802.1p Class of Service (CoS)Yes Port-based QoS Yes DSCP-based QoS Yes DiffServ Yes IEEE 802.3ad Link Aggregation (manual or LACP)Yes IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)Yes IEEE 802.1s Multiple Spanning Trees Protocol (MSTP)Yes IEEE 802.1ab Link Layer Discovery Protocol (LLDP)Yes LLDP-MED Yes SNMP v1, v2c, v3 RFC 1213 MIB II Yes RFC 1643 Ethernet Interface MIB Yes RFC 1493 Bridge MIB Yes RMON group 1, 2, 3, 9 Auto voice VLAN Yes DHCP Filtering Yes Auto denial-of-service (DoS) protection Yes HTTP and HTTPS Yes Ping and traceroute Yes Green features Power saving by cable length (<10 m) Power saving when link down Yes RFC 2131 DHCP client Yes DHCP filtering Yes IEEE 802.1x with Guest VLAN Yes Jumbo frame support Yes Port-based security by locked MAC addresses Yes MAC and IP-based ACL Yes Storm control for broadcast, multicast and unknown unicast packets Yes IGMP snooping v1/v2 Yes EXHIBIT E PAGE 5 of 5 8-port Gigabit Smart Switch Data Sheet | GS108Tv2 Administrative Switch Management GS108Tv2 Port-based egress rate limiting Yes SNTP Yes Port mirroring support (Many to one)Yes Web-based configuration Yes Configuration backup/restore Yes Password access control Yes TACACS+ and RADIUS support Yes Syslog Yes Firmware upgradeable Yes Warranty and Support Hardware Limited Warranty Limited Lifetime* Limited Lifetime* 24x7 Online Chat Technical Support 90 days (24/7) Live Phone Technical Support Next Business Day (NBD) Hardware Replacement ProSUPPORT OnCall 24x7, Category S1** Service Packages Category S1 PMB0S11 (1 yr) PMB0S31 (3 yr) PMB0S51 (5 yr) Package Contents All models 8-port Gigabit Smart Switch (GS108Tv2) Power adapter Rubber footpads Wallmount kit Installation guide Ordering Information GS108T-200NAS North America GS108T-200AUS Australia & Asia GS108T-200GES Europe General GS108T-200UKS United Kingdom GS108T-200JPS Japan ¹ IEEE 802.3af PoE capable devices. *This product comes with a limited warranty that is valid only if purchased from a NETGEAR authorized reseller, and covers unmodified hardware, fans and internal power supplies – not software or external power supplies, and requires product registration at https://www.netgear.com/business/registration within 90 days of purchase; see https://www.netgear.com/about/warranty for details. Intended for indoor use only. **The NETGEAR OnCall 24x7 contract provides unlimited phone, chat and email technical support for your networking product. NETGEAR, the NETGEAR Logo, and ProSUPPORT are trademarks of NETGEAR, Inc. in the United States and/or other countries. Other brand names mentioned herein are for identification purposes only and may be trademarks of their respective holder(s). NETGEAR, Inc. 350 E. Plumeria Drive, San Jose, CA 95134-1911 USA, 1-888-NETGEAR (638-4327), E-mail: info@NETGEAR.com, www.NETGEAR.com D-GS108Tv2-19Jan21 EXHIBIT E Full Kiosk Information EXHIBIT E SAFE. SECURE. SMARTER. Bluetooth-enabled, cloud-based kiosk with flexible software configurations, seamless integrations, and easy DIY maintenance guarantees maximum uptime. Kiosk Value and Benefits Simple and Flexible Design Our Kiosk assembles all the essential elements needed to manage parking access and revenue control in a single elegant unit. Our physical kiosk is highly customizable to meet the unique demands of each parking facility. Whether it’s used to manage transients, monthlies or valet, the software package is configured for each machine’s role in the facility as entry, exit, pay-on-foot and multi-space. In addition, our machines can be configured to accept credit card, RFID, or cash payments with exact change or bill note recycler. Future-proof Platform FlashOS, our mobility hub operating system, powers the logic in all our Kiosk form factors and is purpose- built to run in the cloud, offering enhanced scalability, redundancy, and most importantly—since no on-site servers are needed—virtually no maintenance. Cloud-based software also allows for easy system reconfiguration as technology and venue needs evolve. Versatile Engineering Our unique Kiosk can meet all your needs as we configure the machine as either an entry, exit or as a pay-on-foot, pay-and-display, pay- by-plate, or pay-by-space kiosk. When replacement parts are needed, they are identical in all Kiosks which minimizes spare parts costs and accelerates repair. Total Reliability We provide comprehensive access to monitor and manage all your properties from a single back-end portal via mobile, tablet or desktop. With a 99.99% uptime and a 61% reduction in support calls vs a legecy system, you don’t need to worry about frustrating support and maintenance concerns. Real-time Decision Making Manage rate changes, credit card payments, eParking reservations, and electronic validations in real-time via phone or browser. Worry-free Compliance With Flash, you—the parking provider— outsource 98% of the PCI duties to us, the only Level 1 Service Provider in the industry. The result is instant and on-going complete PCI compliance. It’s that simple! Extreme Weather Rated Our Kiosks are UL Certified to withstand all extreme weather conditions and aluminum-built to prevent corrosion. Extending Your Brand The standard shell of the Kiosk comes in a powder-coated silver; properties looking to extend their brand into the parking facility can wrap their Kiosks in a design of their choosing. EXHIBIT E Kiosk Components and Configurations All Kiosk form factors come standard with real-time reporting and on-demand dashboards that can be accessed anywhere on any device. The mobile app module allows you to manage parking operations from the palm of your hand. Plus, you get over-the-air software updates as demands evolve and new software patches are required. We also offer an optional cash acceptance machine with two choices: exact change only or bill note recycler. Reconciled funds are accounted for electronically and stored in a single locked cashbox. The bill note recycler facilitates a closed-loop cash system, allowing facilities to simplify the cash management process and increase profitability. Beyond the configurations below, there are many payment platform, call-center, analytics and other integrations that are available. Dimensions: Weight: Voltage: Operating Temperature: Humidity: Agency certifications: Rating: 16”w x 12.41”d x 55” h approx. 58 lbs 120V -20 to +140 F 15-95% rH noncondensing UL 60950-1/CSA C22.2 N. 60950-1, and UL 60950-22 Outdoor Use UL 60950-22 under NEMA 250-2008 Kiosk Wall Mount Kiosk Features Benefits Parking kiosk, standard form factor; ruggedized, weather-resistant fixture Parking kiosk, wall-mounted form factor; ruggedized, weather-resistant fixture Bluetooth Beacon Technology Contactless access N/A Camera Visual communication for video support Integrated Intercom with mic & speaker Two-way audio communication LCD Display (10”)Graphical user interface, touch interaction Magnetic stripe reader Credit card acceptance, encrypted at head Barcode Scanner (2D, QR)Read codes on tickets, phones RFID Reader Read proximity cards Thermal printer (2”)Ticket/receipt dispenser Service 24/7 phone and online support For troubleshooting and problem-solving issues FlashCare Maintenance Kit On-site replacement parts Optional Optional Examples of Optional Hardware Hoods and Hats For protection against environment Optional Optional Warmers & AC units For extreme climates Optional Optional Credit card with EMV chip Payment option Optional Optional Exact change only cash machine Cash option Optional N/A Bill Note Recycler cash machine Cash option Optional N/A RFID 12” x 12” extender Extended RFID range Optional N/A Visit us at https://www.Flashparking.com/products/integrations/ to view our robust ecosystem of smart parking and mobility integrations and services. Branding Customized wrapping Extend brand into garage Optional Optional Are You Ready For The Future? Go to FlashParking.com/products to learn about how our suite of technology can power the evolution of your asset into a networked mobility hub. EXHIBIT E Full Kiosk 1. Camera 2. Bluetooth Beacon 3. Microphone 4. Touchscreen Assembly 5. Flash Controller 6. Proximity Card RFID Reader 7. Barcode Scanner 8. Credit Card Reader 9. Printer 10. Speaker 11. Relay Board 12. USB Hub 13. Amplifier 14. 24v Power Supply 15. 12v Power Supply EXHIBIT E Measurements Dimensions 16”w x 12.41”d x 55” h Weight approx. 58 lbs Color Industrial Gray Locks Yes Wrapping Yes, customized wrapping available Electrical Voltage 120V Current Consumption ~8.0 amps max Power Consumption ~1020 watts max PARCS Harware Capabilities Operating Temperature -20 to +140 F Humidity 15-95% rH noncondensing Agency Certifications UL 60950-1/CSA C22.2 N. 60950-1, and UL 60950-22 Outdoor Use Rating UL 60950-22 under NEMA 250-2008 Additional Info Bluetooth Functionality Yes Multi-lingual Yes Communication Options Ethernet/RJ45 with 4G/LTE back-up FLASHCare Kit Yes (a kit with all major peripheral components available) Are You Ready For The Future? Go to FlashParking.com/products to learn about how our suite of technology can power the evolution of your asset into a networked mobility hub. EXHIBIT E EXHIBIT E 001-01FLASH TYPICAL 3801 S CAPITAL OF TEXAS HIGHWAY, STE 250 AUSTIN, TEXAS 78704 REV # DATE INT. REVISIONS DATE: 6/28/23 DESIGNED BY CMDVENDOR SHOP DRAWINGS(FOR INFORMATIONAL PURPOSES ONLY)--------- --------- --------- --------- ---------NOTES:1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOTEXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB.2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEPIN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOPDETECTORS ARE LOCATED IN THE BARRIER GATE.3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOWNATIONAL CODE REQUIREMENTS.4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN.Safety LoopKioskBarrier Gate001 - STANDARD - FULL KIOSK - 1 IN 1 OUTPERSPECTIVEArming LoopBollardEXHIBIT E FT10FT1018' 12'-5" TYP 1'-6" TYP 1'-6" TYP 10'-6" TYP 1'-6" TYP 10" TYP 10" TYP 2' 6" TYP 2' TYP 1' TYP 001-02FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/28/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 3' LANE OVERVIEW DIMENSIONS Barrier Gate Kiosk Bollard 001 - STANDARD - FULLKIOSK - 1 IN 1 OUTNOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK Arming Loop Safety Loop EXHIBIT E FT10FT10QTY (2) 120V 20A CIRCUITS REQUIRED FROM CLOSEST SOURCE BY OTHERS QTY (3) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS 001-03FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/28/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 3' NOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND 001 - STANDARD - FULLKIOSK - 1 IN 1 OUTFLASH CONDUIT LEGEND CONDUIT SIZE INTERNAL WIRING DESIGNATION SIZE DESIGNATION DESCRIPTION QTY 3 4"3 4"A 20A 120V CIRCUIT # 1"1"B CAT6 ETHERNET # 1-1 4" 1- 1 4"C 18/10 STRANDED & SHEILDED # 1-1 2" 1- 1 2"D VEHICLE DETECTION LOOP LEAD IN # ------E ---# ------F ---# ------G ---# ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE LANE OVERVIEW CONDUIT RUN 3/4" CONDUIT SIZE CAT6 INTERNAL WIRE - QTY(2) CONDUIT CALL OUT EXAMPLE: 18/10 STRANDED & SHIELDED INTERNAL WIRE - QTY(1) EXHIBIT E Kiosk 3 4 3 FINISHED GRADE FINISHED GRADE NORTH/SOUTH VIEW SCALE: 1" = 3' EAST/WEST VIEW SCALE: 1" = 3' 001-04FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/28/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------001 - STANDARD - FULLKIOSK - 1 IN 1 OUT2 FULL KIOSK CONDUIT CLEARANCE AND HOLE PATTERN4-1 BARRIER GATE CONDUIT CLEARANCE AND HOLE PATTERN4-3 SCALE: NTS 4-2 TRAFFIC ISLAND 6" CURB SCALE: NTSSCALE: NTS 10"10" EQUIPMENT ANCHORING DETAIL CONDUIT SWEEP FOR VEHICLE DETECTION LOOPS4-4 SCALE: NTS 6" CONC. CURB ANCHOR BOLT(4 TYP) FRONT VIEW OF FULL KIOSK CONDUIT PENETRATION 16" 11" 91 2"121 2" 10" 9"131 2" 151 2" TOP VIEW OF FULL KIOSK TOP VIEW OF BARRIER GATE FULL KIOSK BARRIER GATE ELEVATION VIEW BollardBarrier Gate Safety Loop 1 Arming LoopsSafety Loop EXHIBIT E 002-01FLASH TYPICAL 3801 S CAPITAL OF TEXAS HIGHWAY, STE 250 AUSTIN, TEXAS 78704 REV # DATE INT. REVISIONS DATE: 9/21/23 DESIGNED BY CMDVENDOR SHOP DRAWINGS(FOR INFORMATIONAL PURPOSES ONLY)--------- --------- --------- --------- ---------NOTES:1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOTEXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB.2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEPIN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOPDETECTORS ARE LOCATED IN THE BARRIER GATE.3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOWNATIONAL CODE REQUIREMENTS.4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN.Kiosk002 -STANDARD - FULL KIOSK - REVERSIBLEPERSPECTIVEBollardBarrier GateArming LoopSafety LoopEXHIBIT E FT10FT1018' TYP12'-5" TYP 1'-6" TYP 1'-6" TYP 10'-6" TYP 1'-6" TYP 10" TYP 10" TYP 2' TYP 6" TYP 2' TYP FT10FT1010' 1' TYP 002-02FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:9/21/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 5' LANE OVERVIEW DIMENSIONS Barrier Gate 002 -STANDARD - FULLKIOSK - REVERSIBLENOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK Arming Loop Bollard Kiosk Safety Loop EXHIBIT E FT10FT10FT10FT10QTY (2) 120V 20A CIRCUITS REQUIRED FROM CLOSEST SOURCE BY OTHERS QTY (4) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS QTY (2) 120V 20A CIRCUITS REQUIRED FROM CLOSEST SOURCE BY OTHERS QTY (3) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS 002-03FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:9/21/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 5' LANE OVERVIEW CONDUIT RUN NOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND 002 -STANDARD - FULLKIOSK - REVERSIBLEFLASH CONDUIT LEGEND CONDUIT SIZE INTERNAL WIRING DESIGNATION SIZE DESIGNATION DESCRIPTION QTY 3 4"3 4"A 20A 120V CIRCUIT # 1"1"B CAT6 ETHERNET # 1-1 4" 1- 1 4"C 18/10 STRANDED & SHEILDED # 1-1 2" 1- 1 2"D VEHICLE DETECTION LOOP LEAD IN # ------E ---# ------F ---# ------G ---# ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 3/4" CONDUIT SIZE CAT6 INTERNAL WIRE - QTY(2) CONDUIT CALL OUT EXAMPLE: 18/10 STRANDED & SHIELDED INTERNAL WIRE - QTY(1) EXHIBIT E Kiosk 2 3 FINISHED GRADE FINISHED GRADE NORTH/SOUTH VIEW SCALE: 1" = 3' Arming Loops EAST/WEST VIEW SCALE: 1" = 3' 002-04FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:9/21/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------Safety Loop 002 -STANDARD - FULLKIOSK - REVERSIBLE1 FULL KIOSK CONDUIT CLEARANCE AND HOLE PATTERN4-1 BARRIER GATE CONDUIT CLEARANCE AND HOLE PATTERN4-3 SCALE: NTS 4-2 TRAFFIC ISLAND 6" CURB SCALE: NTSSCALE: NTS 10"10" EQUIPMENT ANCHORING DETAIL CONDUIT SWEEP FOR VEHICLE DETECTION LOOPS4-4 SCALE: NTS 6" CONC. CURB ANCHOR BOLT(4 TYP) FRONT VIEW OF FULL KIOSK CONDUIT PENETRATION 16" 11" 91 2"121 2" 10" 9"131 2" 151 2" TOP VIEW OF FULL KIOSK TOP VIEW OF BARRIER GATE FULL KIOSK BARRIER GATE 4 ELEVATION VIEW Safety Loop Barrier GateBollard EXHIBIT E Free Standing Pay on Foot Information EXHIBIT E EXHIBIT E EXHIBIT E EXHIBIT E ADA Compliance 35 Inches55 InchesSide39.5 InchesFront 45 InchesFlash’s Kiosk allows customers to pay for and validate parking. The kiosk is fully ADA compliant. Kiosk Flash’s Kiosk can be accessed via front reach and is unobstructed. Forward Reach Limits The height to reach the credit card reader, barcode scanner, RFID reader, and ticket spitter is approximately 39.5 inches. The Kiosk is approximately 55 inches high, but the highest touch point component is the LCD display, which is 45 inches There are no obstructions to the front of the Kiosk. Flash’s Kiosk can be accessed via side reach and is unobstructed. Side Reach Limits The height to reach the credit card reader, barcode scanner, RFID reader, and ticket spitter is approximately 39.5 inches. The Kiosk is approximately 55 inches high, but the highest touch point component is the LCD display, which is 45 inches. There are no obstructions to the side of the Kiosk. Floor Space Requirements: The Kiosk has a small floor space footprint and allows for easy wheelchair access. Notes: Operable Parts: The lowest operable part, the ticket spitter, of the Kiosk is at approximately 35 inches. EXHIBIT E Automatic Vehicle Identification (AVI) Information EXHIBIT E www.tagmaster.com sales@tagmaster.com KEY FEATURES DATASHEET XT-5 UHF Reader Automatic Vehicle Identification A world leading reader The XT-5 is our most advanced integrated reader to this date. It has an advanced radio design with high output power, self-jammer cancellation (SJC) and control of antenna polarization (which can be set to vertical, horizontal or circular). It supports both PoE+ (Power over Ethernet) and conventional power supply. It has a high performance processor running Linux. The bright LEDs for visual indication are implemented as RGB (Red/Green/ Blue). An external antenna can be connected, and also this external antenna supports polarization control and RGB LEDs, all using a single RF cable connected to the reader. Unmatched flexibility The XT-5 is easy to install, configure and use. The reader is intended for outdoor usage and is well suited for the toughest environments. XT-5 has a wide number of built-in interfaces including Ethernet (2 separate ports), RS232, RS485 and Wiegand/Magstripe as well as the option to add an additional external antenna. Using a unique firmware implementation the TagMaster readers in a single installation communicates real-time information (per separate antenna) to accurately distinguish and discriminate tags from adjacent lanes using the Distributed Cross Read Elimination (DCRE) feature. The readers also have Distributed Duty Cycling (DDC) ensuring that adjacent readers/antennas do not read simultaneously and thereby achieving absolutely optimal reading conditions. RAIN compliant The TagMaster XT-5 is fully compliant with RAIN. The XT-5 includes TagMaster’s SecureMarkID® tag format, which is developed to ensure that each UHF tag has a unique identity which is difficult to duplicate. The XT-5 combined with our SecureMarkID® tags provides a higher level of security. Advanced Linux based UHF reader with PoE+ High power radio with polarization control Self-jammer cancellation (SJC) Read range up to 10m (33ft) Additional external antenna as option 1118-048-09 PART NO. INFORMATION DESCRIPTION 152800 XT-5 eu Reader 152900 XT-5 us Reader 163810 External XT-5 eu antenna 163820 External XT-5 us antenna 193600 Universal Mounting Kit (optional) 196000 Antenna Cable 10m EXHIBIT E TECHNICAL INFORMATION www.tagmaster.com sales@tagmaster.com Tel: 46 8 6321950 TagMaster AB, Kronborgsgrand 11, 164 46 Kista, Sweden Operating frequencies : : : : : : : : : : : XT-5 eu: 865.6-867.6 MHz, Europe 865.0-867.0 MHz, India 866.0-867.6 MHz, Russian Federation XT-5 us: 902.0-928.0 MHz, Unites States, Americas 920.0-926.0 MHz , Australia 920.5-924.5 MHz, China 919.0-923.0 MHz, Malaysia 921.5-928.0 MHz, New Zealand 920.0-925.0 MHz, Singapore Read range :10 meters (33 ft.) with TagMaster Windshield tag depending on vehicle type and installation conditions Protection :IP66 Housing :Aluminum housing UL94 certified plastic XENOY™ cover Operating temperature :-40°C (-40°F) to +60°C (+140°F) Output power : EU: 2 W (e.r.p). US: 4 W (e.i.r.p) Power supply :12-24 VDC or PoE+ Power consumption :8 W (max 15 W) Input :4 isolated inputs Output :4 isolated outputs Relay :1 relay output, 60 VDC, 2 A Interfaces :RS232, RS485, Wiegand/Magstripe, 2 x Ethernet CPU :ARM Cortex™-A5 running at 536 MHz Memory :4GB Flash, 512 MB DRAM Weight :2.3 kg (5.1 lbs) Dimensions :300 x 300 x 60 mm (11.8 x 11.8 x 2.4 inch) LED indicator :RGB Communication protocols :TAGP and various OEM protocols. More information in TagMaster manuals Encrypted air interface :According to RAIN EMC :EN 301489-1, EN301489-3 Certificates :CE Certificate according directive 2014/53/EU (RED) and FCC Standard :RAIN (EPC Gen2/ISO 18000-63) Safety :EN 60950-1 and 60950-22 Manuals and documentation :XT Series Reader Manual 1118-048-09 Due to TagMaster’s continuous effort to develop the products in response to customer needs, the above specifications are subject to change. EXHIBIT E 02/09/21AXIS CAMERA POLEAMMaterial : BJG01TITLE:02/09/21BJGKMR02/09/21E3801 S. CAPITAL OF TEXAS HIGHWAY, SUITE 250, AUSTIN, TEXAS 78704DCAEAPPV'DSITE CONCRETE AND PAVED LEVELSDWG No.REVISIONDO NOT SCALE DRAWINGSCALE:B- AM - APPR'D FOR MANUF.1/8- PM - PRE MANUFACTURE90-1001-200-101THIS DRAWING IS PRIVATE & CONFIDENTIAL B 1/8E LINEAR: .XXXHOLE CENTRES LINEAR: .XXCASTINGGENERAL STEEL FAB. UP TO 30 FTCASTING MINIMUM RADIIGENERAL STEEL FAB. OVER 30 FTSITE EMBEDDED STEEL LEVELS 1:182.028.010761UNLESS OTHERWISE SPECIFIED:DIMENSIONS AND TOLERANCES PER ASME Y14.5:2009 DIMENSIONS ARE IN INCHES ANGULARWRITTEN CONSENT.STATUS CODE3/32COMMUNICATION & MUST NOT BE COPIED - AB - AS BUILTNAMEDRAWNDATECHK'DOR DISCLOSED TO A THIRD PARTY WITHOUT PROJECTION1/4SURFACE FINISH:TOLERANCES:125No FOLLOWED BY AN ITEM NoBADC431123451/16"1/8"1/32ALL ITEMS TO BE SQUARE, TRUE TO DIMENSIONS GIVEN AND FREE FROM TWIST AND DISTORTION.END PREPARATION FOR WELDING TO BE IN ACCORDANCE WITH BS 5135:1984.ALL ITEMS TO BE CLEARLY MARKED WITH DWG Doc No : E1011 Rev AITEM NO. PART NUMBERDESCRIPTIONQTY.1 90-1001-200-102BASE PLATE12 90-1001-200-103POLE13 90-1001-200-104POLE CAP1ITEM NO. PART NUMBERDESCRIPTIONQTY.1 90-1001-200-102BASE PLATE12 90-1001-200-103POLE13 90-1001-200-104POLE CAP1 96.10 2.00 8.00 3.00 8.00 3.00 321 2.00 EXHIBIT E 008-01FLASH TYPICAL 3801 S CAPITAL OF TEXAS HIGHWAY, STE 250 AUSTIN, TEXAS 78704 REV # DATE INT. REVISIONS DATE: 6/30/23 DESIGNED BY CMDVENDOR SHOP DRAWINGS(FOR INFORMATIONAL PURPOSES ONLY)--------- --------- --------- --------- ---------NOTES:1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOTEXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB.2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEPIN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOPDETECTORS ARE LOCATED IN THE BARRIER GATE.3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOWNATIONAL CODE REQUIREMENTS.4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. 008 - AVI(P) - FULL KIOSK - 1 IN 1 OUTPERSPECTIVEArming LoopBollardAVI Reader(Pole Mounted)Barrier GateSafety LoopKioskEXHIBIT E FT10FT1018' 12'-5" TYP 1'-6" TYP 2' TYP 10'-6" TYP 1'-6" TYP 10" TYP 10" TYP 2' 6" TYP 2' TYP 1' TYP 1' TYP 10" TYP 008-02FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 3' LANE OVERVIEW DIMENSIONS 008 - AVI(P) - FULL KIOSK - 1IN 1 OUTNOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK 8'x2"x2" SQ TUBE 8"x8"x1/4" BASE PLATE AVI POST ENTRY & EXIT LOW VOLTAGE AVI READER Arming Loop Kiosk BollardBarrier Gate Safety Loop AVI Reader (Pole Mounted) EXHIBIT E FT10FT10QTY (2) 120V 20A CIRCUITS REQUIRED FROM CLOSEST SOURCE BY OTHERS QTY (5) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS 008-03FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 3' NOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND 008 - AVI(P) - FULL KIOSK - 1IN 1 OUTFLASH CONDUIT LEGEND CONDUIT SIZE INTERNAL WIRING DESIGNATION SIZE DESIGNATION DESCRIPTION QTY 3 4"3 4"A 20A 120V CIRCUIT # 1"1"B CAT6 ETHERNET # 1-1 4" 1- 1 4"C 18/10 STRANDED & SHEILDED # 1-1 2" 1- 1 2"D VEHICLE DETECTION LOOP LEAD IN # ------E ---# ------F ---# ------G ---# ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 8'x2"x2" SQ TUBE 8"x8"x1/4" BASE PLATE AVI POST ENTRY & EXIT LOW VOLTAGE AVI READER LANE OVERVIEW CONDUIT RUN 3/4" CONDUIT SIZE CAT6 INTERNAL WIRE - QTY(2) CONDUIT CALL OUT EXAMPLE: 18/10 STRANDED & SHIELDED INTERNAL WIRE - QTY(1) EXHIBIT E FINISHED GRADE FINISHED GRADE NORTH/SOUTH VIEW SCALE: 1" = 4' EAST/WEST VIEW SCALE: 1" = 4' 008-04FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------008 - AVI(P) - FULL KIOSK - 1IN 1 OUTFULL KIOSK CONDUIT CLEARANCE AND HOLE PATTERN4-1 BARRIER GATE CONDUIT CLEARANCE AND HOLE PATTERN4-3 SCALE: NTS 4-2 TRAFFIC ISLAND 6" CURB SCALE: NTSSCALE: NTS 10"10" EQUIPMENT ANCHORING DETAIL CONDUIT SWEEP FOR VEHICLE DETECTION LOOPS4-4 SCALE: NTS 6" CONC. CURB ANCHOR BOLT(4 TYP) FRONT VIEW OF FULL KIOSK CONDUIT PENETRATION 16" 11" 91 2"121 2" 10" 9"131 2" 151 2" TOP VIEW OF FULL KIOSK TOP VIEW OF BARRIER GATE FULL KIOSK BARRIER GATE 2 31 4 ELEVATION VIEW Kiosk Arming Loops Safety LoopSafety Loop Barrier GateBollard AVI Reader (Pole Mounted) EXHIBIT E 010-01FLASH TYPICAL 3801 S CAPITAL OF TEXAS HIGHWAY, STE 250 AUSTIN, TEXAS 78704 REV # DATE INT. REVISIONS DATE: 6/30/23 DESIGNED BY CMDVENDOR SHOP DRAWINGS(FOR INFORMATIONAL PURPOSES ONLY)--------- --------- --------- --------- ---------NOTES:1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOTEXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB.2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEPIN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOPDETECTORS ARE LOCATED IN THE BARRIER GATE.3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOWNATIONAL CODE REQUIREMENTS.4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. 010 - AVI(P) - FULL KIOSK - REVERSIBLEPERSPECTIVEArming LoopBollardAVI Reader(Pole Mounted)Barrier GateSafety LoopKioskEXHIBIT E FT10FT1018' TYP12'-5" TYP 1'-6" TYP 10'-6" TYP 1'-6" TYP 10" TYP 10" TYP 2' TYP 6" TYP 2' TYP FT10FT1010' 1' TYP 1' TYP 2' TYP 010-02FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 5' LANE OVERVIEW DIMENSIONS 010 - AVI(P) - FULL KIOSK -REVERSIBLENOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK 8'x2"x2" SQ TUBE 8"x8"x1/4" BASE PLATE AVI POST ENTRY & EXIT LOW VOLTAGE AVI READER Arming Loop Kiosk BollardBarrier Gate Safety Loop AVI Reader (Pole Mounted) EXHIBIT E FT10FT10FT10FT10QTY (2) 120V 20A CIRCUITS REQUIRED FROM CLOSEST SOURCE BY OTHERS QTY (6) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS QTY (2) 120V 20A CIRCUITS REQUIRED FROM CLOSEST SOURCE BY OTHERS QTY (5) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS 010-03FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 5' NOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND 010 - AVI(P) - FULL KIOSK -REVERSIBLEFLASH CONDUIT LEGEND CONDUIT SIZE INTERNAL WIRING DESIGNATION SIZE DESIGNATION DESCRIPTION QTY 3 4"3 4"A 20A 120V CIRCUIT # 1"1"B CAT6 ETHERNET # 1-1 4" 1- 1 4"C 18/10 STRANDED & SHEILDED # 1-1 2" 1- 1 2"D VEHICLE DETECTION LOOP LEAD IN # ------E ---# ------F ---# ------G ---# ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 8'x2"x2" SQ TUBE 8"x8"x1/4" BASE PLATE AVI POST ENTRY & EXIT LOW VOLTAGE AVI READER LANE OVERVIEW CONDUIT RUN 3/4" CONDUIT SIZE CAT6 INTERNAL WIRE - QTY(2) CONDUIT CALL OUT EXAMPLE: 18/10 STRANDED & SHIELDED INTERNAL WIRE - QTY(1) EXHIBIT E 2 4 3 FINISHED GRADE FINISHED GRADE NORTH/SOUTH VIEW SCALE: 1" = 4' EAST/WEST VIEW SCALE: 1" = 4' 010-04FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------010 - AVI(P) - FULL KIOSK -REVERSIBLE1 FULL KIOSK CONDUIT CLEARANCE AND HOLE PATTERN4-1 BARRIER GATE CONDUIT CLEARANCE AND HOLE PATTERN4-3 SCALE: NTS 4-2 TRAFFIC ISLAND 6" CURB SCALE: NTSSCALE: NTS 10"10" EQUIPMENT ANCHORING DETAIL CONDUIT SWEEP FOR VEHICLE DETECTION LOOPS4-4 SCALE: NTS 6" CONC. CURB ANCHOR BOLT(4 TYP) FRONT VIEW OF FULL KIOSK CONDUIT PENETRATION 16" 11" 91 2"121 2" 10" 9"131 2" 151 2" TOP VIEW OF FULL KIOSK TOP VIEW OF BARRIER GATE FULL KIOSK BARRIER GATE ELEVATION VIEW Kiosk Arming Loops Safety LoopSafety Loop Barrier GateBollard AVI Reader (Pole Mounted) EXHIBIT E 012-01FLASH TYPICAL 3801 S CAPITAL OF TEXAS HIGHWAY, STE 250 AUSTIN, TEXAS 78704 REV # DATE INT. REVISIONS DATE: 6/30/23 DESIGNED BY CMDVENDOR SHOP DRAWINGS(FOR INFORMATIONAL PURPOSES ONLY)--------- --------- --------- --------- ---------NOTES:1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOTEXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB.2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEPIN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOPDETECTORS ARE LOCATED IN THE BARRIER GATE.3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOWNATIONAL CODE REQUIREMENTS.4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. 012 - AVI(P) - FULL KIOSK - SDLPERSPECTIVEArming LoopBollardKioskAVI Reader(Pole Mounted)Barrier GateSafety LoopEXHIBIT E FT1010"10" 2' 6" TYP 2'1' 10" 18' 12'-5" 1'-6" TYP 1' 2' 1'-6" 012-02FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 3' LANE OVERVIEW DIMENSIONS 012 - AVI(P) - FULL KIOSK -SDLNOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK ENTRY & EXIT LOW VOLTAGE AVI READER 8'x2"x2" SQ TUBE 8"x8"x1/4" BASE PLATE AVI POST Arming Loop Kiosk Safety Loop Bollard AVI Reader (Ceiling Mounted) Barrier Gate EXHIBIT E FT10QTY (1) 120V 20A CIRCUITS REQUIRED FROM CLOSEST SOURCE BY OTHERS QTY (3) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS 012-03FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 3' NOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND 012 - AVI(P) - FULL KIOSK -SDLFLASH CONDUIT LEGEND CONDUIT SIZE INTERNAL WIRING DESIGNATION SIZE DESIGNATION DESCRIPTION QTY 3 4"3 4"A 20A 120V CIRCUIT # 1"1"B CAT6 ETHERNET # 1-1 4" 1- 1 4"C 18/10 STRANDED & SHEILDED # 1-1 2" 1- 1 2"D VEHICLE DETECTION LOOP LEAD IN # ------E ---# ------F ---# ------G ---# ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE ENTRY & EXIT LOW VOLTAGE AVI READER 8'x2"x2" SQ TUBE 8"x8"x1/4" BASE PLATE AVI POST LANE OVERVIEW CONDUIT RUN 3/4" CONDUIT SIZE CAT6 INTERNAL WIRE - QTY(2) CONDUIT CALL OUT EXAMPLE: 18/10 STRANDED & SHIELDED INTERNAL WIRE - QTY(1) EXHIBIT E 4 FINISHED GRADE FINISHED GRADE NORTH/SOUTH VIEW SCALE: 1" = 4' EAST/WEST VIEW SCALE: 1" = 4' 012-04FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------012 - AVI(P) - FULL KIOSK -SDLFULL KIOSK CONDUIT CLEARANCE AND HOLE PATTERN4-1 BARRIER GATE CONDUIT CLEARANCE AND HOLE PATTERN4-3 SCALE: NTS 4-2 TRAFFIC ISLAND 6" CURB SCALE: NTSSCALE: NTS 10"10" EQUIPMENT ANCHORING DETAIL CONDUIT SWEEP FOR VEHICLE DETECTION LOOPS4-4 SCALE: NTS 6" CONC. CURB ANCHOR BOLT(4 TYP) FRONT VIEW OF FULL KIOSK CONDUIT PENETRATION 16" 11" 91 2"121 2" 10" 9"131 2" 151 2" TOP VIEW OF FULL KIOSK TOP VIEW OF BARRIER GATE FULL KIOSK BARRIER GATE 1 32 ELEVATION VIEW Kiosk Safety LoopArming Loop Barrier GateBollard AVI Reader (Pole Mounted) EXHIBIT E License Plate Recognition (Vision) Information EXHIBIT E EXHIBIT E EXHIBIT E REVISIONS ZONE REV.DESCRIPTION DATE APPROVED 02 UPDATED UPPER L POLE GEOMETRY 5/12/2020 BJG ITEM NO.PART NUMBER DESCRIPTION QTY. 1 90-1001-200-120 BASE ASSEMBLY 1 2 90-1001-200-123 UPPER L POLE WELDMENT 1 SQ TUBE, 6063 02 AM 05/12/20 05/12/20 KMR BJG BJG Material : LPR POLE B 90-1001-200-124 GENERAL STEEL FAB. UP TO 30 FT GENERAL STEEL FAB. OVER 30 FT HOLE CENTRES CASTING CASTING MINIMUM RADII SITE EMBEDDED STEEL LEVELS SITE CONCRETE AND PAVED LEVELS DWG No.REVISION DO NOT SCALE DRAWINGSCALE: TITLE: 1:18 125 .02 .010 1 DIMENSIONS AND TOLERANCES PER ASME Y14.5:2009 UNLESS OTHERWISE SPECIFIED: DIMENSIONS ARE IN INCHES SURFACE FINISH: TOLERANCES: LINEAR: .XX LINEAR: .XXX ANGULAR 1/16" 1/8" 1/32 1/8 1/8 3/32 1/4 THIS DRAWING IS PRIVATE & CONFIDENTIAL COMMUNICATION & MUST NOT BE COPIED OR DISCLOSED TO A THIRD PARTY WITHOUT WRITTEN CONSENT. STATUS CODE PROJECTION - PM - PRE MANUFACTURE - AM - APPR'D FOR MANUF. - AB - AS BUILT NAME DRAWN DATE CHK'D APPV'D ALL ITEMS TO BE SQUARE, TRUE TO DIMENSIONS GIVEN AND FREE FROM TWIST AND DISTORTION. END PREPARATION FOR WELDING TO BE IN ACCORDANCE WITH BS 5135:1984. ALL ITEMS TO BE CLEARLY MARKED WITH DWG No FOLLOWED BY AN ITEM No B A D C 431 1 2 3 4 5 6 7 8 2 E B E A C D E L TYPE ASSEMBLY 05/12/20 3801 S. CAPITAL OF TEXAS HIGHWAY, SUITE 250, AUSTIN, TEXAS 78704 Doc No : E1011 Rev A EXHIBIT E 060-01FLASH TYPICAL 3801 S CAPITAL OF TEXAS HIGHWAY, STE 250 AUSTIN, TEXAS 78704 REV # DATE INT. REVISIONS DATE: 6/30/23 DESIGNED BY CMDVENDOR SHOP DRAWINGS(FOR INFORMATIONAL PURPOSES ONLY)--------- --------- --------- --------- ---------NOTES:1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOTEXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB.2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEPIN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOPDETECTORS ARE LOCATED IN THE BARRIER GATE.3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOWNATIONAL CODE REQUIREMENTS.4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN.Arming LoopSafety LoopKioskBollardBarrier Gate060 - FLASHVISION(P-PAD) &AVI(P) - FULL KIOSK - 1 IN 1 OUTFLASHVision LPR Camera(Pole Mounted)AVI Reader(Pole Mounted)PERSPECTIVEEXHIBIT E FT10FT1018'12'-5" TYP 1'-6" TYP 2' TYP 10'-6" TYP 1'-6" TYP 10" TYP 10" TYP 2' 6" TYP 2' TYP 1' TYP 1' TYP 10" TYP 25' TYP 4' TYP 2' TYP 1' TYP 1'-4" TYP 2' TYP 2' TYP 060-02FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 5' LANE OVERVIEW DIMENSIONS Arming Loop Safety Loop Barrier Gate Kiosk Bollard 060 - FLASHVISION(P-PAD)&AVI(P) - FULL KIOSK - 1 IN 1OUTNOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK ENTRY & EXIT LOW VOLTAGE AVI READER 8'x2"x2" SQ TUBE 8"x8"x1/4" BASE PLATE AVI POST 17" DIA BASE PLATE LPR "L" POLE DEDICATED CAT6 FLASHVISION LPR CAMERA FLASHVision LPR Camera (Pole Mounted) AVI Reader (Pole Mounted) EXHIBIT E FT10FT10A2 QTY (2) 120V 20A CIRCUITS REQUIRED FROM CLOSEST SOURCE BY OTHERS QTY (4) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS QTY (1) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS QTY (1) CAT6 REQUIRED FROM NETWORK ROOM BY OTHERS 060-03FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------SCALE: 1" = 5' NOTES: 1. ASSUMES 6" CURB HEIGHT AND LEVEL AT CENTERLINE OF DEVICES. DO NOT EXCEED 8" OR BELOW 4" FROM GRADE TO TOP OF CURB. 2. ALL VEHICLE LOOPS (PROVIDED BY FLASH) TO BE PRE-FORMED 3' x 6' CUT 1" DEEP IN GRADE TO RESPECTIVE CONDUIT SWEEPS. BOTH ARMING & SAFETY LOOP DETECTORS ARE LOCATED IN THE BARRIER GATE. 3. CONDUIT SIZES PROVIDED ARE TYPICAL AS NEEDED. GC SHOULD FOLLOW NATIONAL CODE REQUIREMENTS. 4. 20FT SERVICE LOOP REQUIRED FOR EACH CAT6 HOMERUN. FLASH EQUIPMENT LEGEND 060 - FLASHVISION(P-PAD)&AVI(P) - FULL KIOSK - 1 IN 1OUTFLASH CONDUIT LEGEND CONDUIT SIZE INTERNAL WIRING DESIGNATION SIZE DESIGNATION DESCRIPTION QTY 3 4"3 4"A 20A 120V CIRCUIT # 1"1"B CAT6 ETHERNET # 1-1 4" 1- 1 4"C 18/10 STRANDED & SHEILDED # 1-1 2" 1- 1 2"D VEHICLE DETECTION LOOP LEAD IN # ------E ---# ------F ---# ------G ---# ENTRY & EXIT MAX 8A, 120V AC DEDICATED CAT6 16" CLEARANCE REQUIRED FOR REAR DOOR ACCESS FLASH KIOSK 3'x6' OR 2'x7' VEHICLE DETECTION LOOP IF INCLUDED IN SCOPE: 41/2" Ø STEEL PIPE 8"x8"x1/4" MOUNTING PLATE SAFETY YELLOW IF NOT INCLUDED IN SCOPE: LOCATION IS A RECOMMENDATION AND SHALL BE SUPPLIED BY OTHERS BOLLARD MAX 2.5A, 120V AC 10'-20' BOOM STRAIGHT OR ARTICULATING BARRIER GATE ENTRY & EXIT LOW VOLTAGE AVI READER 8'x2"x2" SQ TUBE 8"x8"x1/4" BASE PLATE AVI POST 17" DIA BASE PLATE LPR "L" POLE DEDICATED CAT6 FLASHVISION LPR CAMERA LANE OVERVIEW CONDUIT RUN 3/4" CONDUIT SIZE CAT6 INTERNAL WIRE - QTY(2) CONDUIT CALL OUT EXAMPLE: 18/10 STRANDED & SHIELDED INTERNAL WIRE - QTY(1) EXHIBIT E Safety Loop Kiosk Barrier Gate 4 Bollard FINISHED GRADE FINISHED GRADE NORTH/SOUTH VIEW SCALE: 1" = 4' Arming Loops EAST/WEST VIEW SCALE: 1" = 5' 060-04FLASH TYPICAL3801 S CAPITAL OF TEXAS HIGHWAY,STE 250 AUSTIN, TEXAS 78704REV # DATE INT.REVISIONSDATE:6/30/23DESIGNED BYCMDVENDOR SHOP DRAWINGS (FOR INFORMATIONAL PURPOSES ONLY)---------------------------------------------Safety Loop 060 - FLASHVISION(P-PAD)&AVI(P) - FULL KIOSK - 1 IN 1OUTFULL KIOSK CONDUIT CLEARANCE AND HOLE PATTERN4-1 BARRIER GATE CONDUIT CLEARANCE AND HOLE PATTERN4-3 SCALE: NTS 4-2 TRAFFIC ISLAND 6" CURB SCALE: NTSSCALE: NTS 10"10" EQUIPMENT ANCHORING DETAIL CONDUIT SWEEP FOR VEHICLE DETECTION LOOPS4-4 SCALE: NTS 6" CONC. CURB ANCHOR BOLT(4 TYP) FRONT VIEW OF FULL KIOSK CONDUIT PENETRATION 16" 11" 91 2"121 2" 10" 9"131 2" 151 2" TOP VIEW OF FULL KIOSK TOP VIEW OF BARRIER GATE FULL KIOSK BARRIER GATE 2 3 31 FLASHVision LPR Camera (Pole Mounted) AVI Reader (Pole Mounted) ELEVATION VIEW 6'10" - 8'6" EXHIBIT E In-Ground Loops Information EXHIBIT E Dec 2022 Est. 2001 Preformed 3/16” Saw-Cut Loop BD Loops | 1907 Nancita Cir. Placentia, CA 92870 | www.BDLoops.com P: 714-723-0946 | F: 714-890-1603 | E: team@bdloops.com Description BD Loops Preformed Saw-Cut Inductance Loops are a complete loop with a set size loop and length of lead-in run. Our Saw-Cut Loops have an extra layer of protection: a durable outer jacket that protects and tightly binds the inner conductors. All BD Loops are made with 16 AWG copper wire and rated for direct burial use. Uses For saw-cut installations where a 3/16” or wider slot is cut into the concrete or asphalt and the loop wire is stuffed into the saw - cut slot and sealed with loop sealant. Superior Features • Extra layer of protection—Thick and durable outer jacket protects both loop and lead-in. • Each loop is tested 3 ways before it leaves the factory. • Backer-rod is built into the wire! No need to use backer-rod if the loop is installed in a 3/16” saw-cut groove. • Lead-in wires are tightly bound in an protective outer jacket. Eliminating the need for twisting. Installation Visit BDLoops.com to download our latest installation instructions. Basic installation process is to saw-cut the loop pattern and lead-in run into the surface. Push the preformed saw-cut loop into the saw-cut groove and then seal the loop and lead-in with loop sealant. Installing in a concrete pour or planning to bury the loop? Use BD Loops Preformed Direct Burial Loop instead. Packaging See reverse side for standard loop sizes and part numbers. • Both loop and lead-in fit into a 3/16” wide saw-cut groove. No more double cutting the lead-in run! • Loop fills up a larger percentage of the saw-cut groove, re- quires less loop sealant to seal the groove. (30-40% less sealant vs a 1/4” groove) • Cuts don’t need to be exact! Any BD Loop can be made up to 4’ smaller. Be slightly conservative with your cuts and BD Loops Preformed Saw-Cut Loops will fit every time. Technical Specs Wire Gauge 16 AWG Copper # Turns 2-4 (Depends on loop and lead-in size) Outer Jacket Material PE Insulation Material PE / Nylon Temperature Rating 75° C (167° F) Wire Voltage Rating 600V Rated for Direct Burial Use Product is a fully formed loop with a set size loop section and set length of lead-in. No assembly required. See next page for a list of standard size loops and part numbers. How to read BD-Loops Part Numbers Example: SC 24 - 50 Loop Size Perimeter (ft) In this example 24’ (4x8’ or 6x6’). Lead-in Length (ft) Type of Loop RL or EL = Direct Burial SC = Saw-Cut EXHIBIT E Est. 2001 Preformed 3/16” Saw-Cut Loop BD Loops | 1907 Nancita Cir. Placentia, CA 92870 | www.BDLoops.com P: 714-723-0946 | F: 714-890-1603 | E: team@bdloops.com BD Loops Saw-Cut Loop Sizes The standard size loops listed in the chart below are available for same day shipping if BD Loops receives a PO from a distri butor by 3:30 pm PST. Custom size loops are available and can ship same day if the PO is received by 12:00 pm PST. Maintenance BD Loops preformed loops are a no maintenance vehicle detection solution. Testing If you suspect an issue with an inductance loop test it with a Megohmmeter. Megohmmeters are insulation testers. They are the only meter that can test for the most com- mon loop issue: a nick in the insu- lation causing the loop to short to ground. For detailed instructions on how to test a loop with a meg- ohmmeter visit BDLoops.com Storage BD Loops preformed loops do not expire/ have a shelf life. We recommend storing unused preformed loops inside a box or bin indoors to keep them clean. Keeping the loops clean will allow loop sealant to better adhere to the loops. Questions? BD Loops is here for you. We have a 24 Hour tech support line. Give us a call at: 714-723-0946. Dec 2022 EXHIBIT E Pedestrian Warning Signage Information EXHIBIT E Product View NOTE: Sign image may not exactly represent the finished product. For illustration purposes only. 09272018 | DP Side A Side B 18 in 14 in 5 1/2 in PRODUCT ID: 42969 Outdoor Blank-out LED Backlit Sign MODELPHX1418DAA-171/12-24VDC DIMENSIONS14" H x 18" W x 5.5" D (est. 15.952 lbs) CLASSClass: PHX SeriesControl Method: Switch (not included) or external relay. CONSTRUCTIONCabinet: Corrosion resistant, extruded aluminum frame. 5.5" deep, mitered construction.Face Material: 1/8" thick, dark grey diffused acrylicFaces: Double Faced SignFinish: Duranodic BronzeMounting Channel: None ELECTRICALFlashing: Not IncludedInput Voltage: 12-24 VDCUL/cUL Listed: Listed for wet locations MESSAGEColor: Black opaqueFont: Swiss 721 Bold BTIllumination: Backlit with high intensity LEDs. Message blanks out when offSign Messages: See message table below MESSAGE LED/COLOR HEIGHT AMPS CAUTION VEHICLES EXITING w/Border Amber Wide Angle LED 11.875", 2.125"3.680-1.840CAUTION VEHICLES EXITING w/Border Amber Wide Angle LED 11.875", 2.125"3.680-1.840 NOTE: Above messages are independently controlled. Signal-Tech4985 Pittsburgh Ave.Erie, PA 16509Phone: (877) 547-9900Fax: (814) 835-2300Email: sales@signal-tech.comWebsite: www.signal-tech.com Copyright (C) 2019 Signal-Tech Proudly Made in the USA EXHIBIT E Windcave EMV Information EXHIBIT E Certifications & Compliance PCI PTS 6.x, compliant with PCI P2PE, EMVCo L1 & L2 Contact and Contactless security requirements to keep your transactions secure and reduce your compliance costs. Modular Payment Solution Available either standalone or paired with the SKP200F pinpad and/or the BRF210F or BRF210L contactless reader for a complete multichannel payment solution. Ease of Payments Accepts magnetic stripe and chip cards, minimising friction and allowing users a range of payment methods. Design Slim, wide, front or back bezel mounted options available. SCR200F Specifications Card Readers Magstripe EMV Contact Card Contactless Human Interface Card Illumination Lights Audio Buzzer Connectivity 1 x RS232 — Serial & Power Dimensions 110 x 81 x 17mm — Rear Mount Weight 402.4g (14.2 oz) — Rear Mount Power Supply 9-45V DC Operating Humidity 85% non condensing at 40°C/104°F Operating Temperature -25 °C/-13°F to 75°C/167°F Storage Temperature -30°C/-22°F to 80°C/176°F IP / IK Rating IP 45 / IK 10 888.737.7465 2500 Bee Caves Rd. Bldg III, Ste 400 Austin, TX 78746 FLASHPARKING.COM EXHIBIT E Certifications & Compliance PCI PTS 6.x, compliant with PCI P2PE, EMVCo L1 Contactless & L2 Contactless security requirements to protect your transactions and reduce your compliance costs. Modular Solution Available either standalone or paired with the SCR200F and an optional SKP200F for an unbeatable unattended payment solution. Responsive LED interface Four LEDs enable visual feedback, communicating the status of contactless payments. Sizing Options Options for a horizontal or vertical form factor, for the easiest possible integration into your existing solution. BRF210F Specifications Card Readers Contactless Human Interface 4x Card Detection Indicators Audio Buzzer Connectivity RS232 Dimensions 97.2 x 81.2 x 20.9mm Power Supply 9 - 45V DC Weight 277g (9.8 oz) Power Saving Low Power Card Detect (LPCD) Ultra low power mode Operating Humidity 85% Non-Condensing at 40°C/104°F Storage Temperature -30°C/-22°F to 85°C/185°F Operating Temperature -25°C/-13°F to 75°C/167°F IP Rating / IK Rating IP 66 / IK 10 888.737.7465 2500 Bee Caves Rd. Bldg III, Ste 400 Austin, TX 78746 FLASHPARKING.COM EXHIBIT E EMAIL To : _______________________________ From: ________________________________ Mobile: 512-547-9165 Date: _____/______/__________ Request for Onsite Presence/Call for Commissioning In order to request onsite presence from Flash, the General Contractor is required to complete and submit the items below to their Flash Project Manager. Upon receipt of the completed form with pictures, the Flash Project Manager will schedule a Commissioner/Installation crew to be on-site to install and commission the system. Please allow for up to 2 weeks from receipt of form to schedule Flash onsite. To avoid any delays or extra costs, it is essential that the Electrical and General Contractors be available to resolve any issues during the installation and commissioning. In summary, the completed form below must be received at Flash, along with pictures of full lanes, islands, and stub ups with wiring prior to scheduling any installation or commissioning services. (To include pre installation activities) Please complete and sign this sheet and email along with pictures to the Flash Project Manager. Flash Check List for Commissioning Site Name __________________ City/ST: _______________________ Date Installation/Commissioning Requested: ________________________ Completed (please check the boxes) ⬜ Islands formed and poured with stub-ups in place ⬜ Power/Data cabling to all parking equipment ⬜ Pathways available for additional cable pulls ⬜ Lanes/work area will be clear and accessible on during installation ⬜ Pictures Submitted ● I certify that all of the work has been completed per the instructions listed above. It is my understanding that if this work is NOT completed prior to the Flash Technician’s arrival onsite on the agreed upon date, there will be a $1250 per day charge for the Flash Technician having to wait on the work to be completed, or the Flash Technician will be released from the site and a return trip fee will be added to the final invoice. General Contractor Print Name: Signature: Date: EXHIBIT E